MSN
MSN
在线咨询
在线咨询
 
JCA
德国STEGO
MBS
Italcoppie
Emas
Tuerk-hillinger
丹麦SAN
丹麦L&S
韩国KACON
 
 产品阵容
 型号说明:恒温器FTD 011
 资料下载:



  • NO and NC in one casing
  • Default temperature settings
  • High switching accuracy
  • Clip fixing

Two thermostats in one casing:
Tamper-proof (Pre-set) Thermostat/Contact breaker (NC) for regulating heaters or for switching signal devices when temperature has fallen below the minimum value. The contact opens when temperature is rising. 

Tamper-proof (Pre-set) Thermostat/Contact maker (NO) for regulating filter fans, heat exchangers or for switching signal devices when temperature limit has been exceeded. The contact closes when temperaure is rising.

Heaters and cooling equipment can be switched independently from each other with a temperature offset as opposed to the usual change-over contacts. 

TECHNICAL DATA

Sensor element thermostatic bimetal
Contact type snap-action contact
Service life > 100,000 cycles
Max. switching capacity 250VAC, 5 (1.6) A / 120VAC, 10 (2) A
DC 30W
Max. inrush current AC 16A for 10 sec.
Connection 4-pole terminal, clamping torque 0.8Nm max.:
rigid wire 2.5mm² (AWG 14)
stranded wire1 1.5mm² (AWG 16)
Mounting clip for 35mm DIN rail, EN 60715
Casing plastic according to UL94 V-0, light grey
Dimensions 47 x 63 x 33mm
Weight approx. 40g
Fitting position variable
Operating/Storage temperaure -40 to + 80°C (-40 to +176°F) / -45 to + 80°C (-49 to +176°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type IP20
Approvals VDE, UL File No. E164102, EAC

¹ When connecting with stranded wires, wire end ferrules must be used.

Art. No.                 Contact breaker (NC)                 Contact maker (NO)
  Switch-off temperature Switch-on temperature Switch-on temperature Switch-off temperature
01163.0-00 +15°C / +59°F (±5K tolerance) +5°C / +41°F (±5K tolerance) +50°C / +122°F (±6K tolerance) +40°C / +104°F (±7K tolerance)
01163.0-01 +25°C / +77°F (±5K tolerance) +15°C / +59°F (±5K tolerance) +60°C / +140°F (±6K tolerance) +50°C / +122°F (±7K tolerance)
01163.0-02 +15°C / +59°F (±5K tolerance) +5°C / +41°F (±5K tolerance) +35°C / +95°F (±6K tolerance) +25°C / +77°F (±7K tolerance)
01163.0-03 +25°C / +77°F (±5K tolerance) +15°C / +59°F (±5K tolerance) +50°C / +122°F (±6K tolerance) +40°C / +104°F (±7K tolerance)
Art. No.                 Contact maker (NO) 
                 Contact maker (NO)

Switch-on temperature Switch-off temperature Switch-on temperature Switch-off temperature
01164.0-00 +50°C / +122°F (±6K tolerance) +40°C / +104°F (±7K tolerance) +60°C / +140°F (±6K tolerance) +50°C / +122°F (±7K tolerance)

Note: Other switch-off and switch-on temperatures on request.

TECHNICAL DRAWING

Tamper-proof Dual Thermostat (Pre-set) FTD 011

 Copyright © 2009 深圳市杰诚伟业科技发展有限公司 备案序号:粤ICP备161105340号

地址:深圳市罗湖区文锦北路1010号文锦广场文盛中心2105  电话:0755-25626321 25621887  传真:0755-25626326